Injection tension means that the pushing force applied together with the attachment clamps the molten plastic-like material compound into the mold cavity. It is actually very balanced due to the clamping tension in the equipment. The picture tension may be the melt stress that handles all the additional thoughts by injection..mould supplier， Injection tension is usually used to overcome the resistance of the molten material in the barrel on the cavity, so that the textile includes a specific finish price and compacts it. The impact stress can be assessed by using sensors throughout the nozzle or hydraulic drinking water pipe. It does not provide a fixed reward, the more difficult it is to apply pressure to the fungus, the greater the injection pressure.
Injection molding is the process of using warm materials to complete the mold cavity. In theory, if the surface defects and fungal infection factors of goods and services are not considered, the faster the speed, the better the effect. But because combustion will produce resistance in the circulation method (tension through the mold), and there is tension resistance from your mold cavity, so the equipment must provide an amount greater than or equal to the resistance (hydraulic from the opportunity method) to help melt The material flows into the cavity, which happens to be that the injection molding process is also an activity that overcomes the resistance level. At the end of injection molding, is there often stress from the beginning? Absolutely not, although the injection is normal. When the textile flow meets the fungal cavity, its contact with the functional working surface continues to occur
