technology

• What are the advantages of precision parts processing

  In the machining industry, machining accuracy often determines the quality of machined parts to a large extent. precision manufacturers， There are many advantages that other machining methods do not have. So what are the advantages of CNC precision parts machining?

  1. Multi-axis control linkage: Generally, three-axis linkage is used the most, but through some adjustments, four-axis, five-axis, seven-axis or even more linkage axes can be achieved.

  2. Parallel connection of machine tools: The functions of common machining centers are also relatively fixed. You can combine machining centers and turning centers, or vertical and horizontal machining centers, which can increase the processing range and processing capacity of the machining center.

  3. Early warning of tool breakage: Using some technical detection methods, the wear and damage of the tool can be found in time, and an alarm will be issued, so that the tool can be replaced in time to ensure the processing quality of the parts.

  4. Tool life management: It is possible to manage multiple tools working at the same time and multiple blades on the same tool to improve production efficiency.

  5. Machine tool overload and power-off protection: According to the load of the production process, the maximum load level is set. When the load reaches the set value, the machine tool can realize automatic power-off and shutdown to protect the machine tool.
  
  
  

  like：

  Precautions for cutting fluid in parts processing

  The formula and section of CNC modern technology
  
  

  CNC installation times division process

  PR
  • technology
  • 2022/01/20 12:50
  • 0
• Is Energetic Noise Cancellation Great for Bluetooth Earbuds?

  1, easy to use. Noise-cancelling earphones are earphones designed to use some method to minimize disturbance. ANC Headphones ，Currently, noises-cancelling headphones are mostly split up into active sound-cancelling and indirect sound-cancelling.

  2. The noise lessening theory is as follows:

  (1) Very first, the reduced-frequency disturbance (100 ~ 1000Hz) from the environment that could be heard by the ear canal is detected with the transmission microphone placed in the earphone.

  (2) The sound sign is then delivered to the control circuit, and the control circuit executes real-time operations.

  (3) Play in the seem waves with the opposing cycle as well as the very same amplitude as the sound through Hi-Fi speaker systems to terminate the sound.

  (4) After superposition, the noises vanishes and can not be heard.

   

  like：

  What are ANC headphones? what sorts

   

  What does ANC on headsets suggest?
  
  What will be the distinction between ANC, DSP, ENC, and CVC?

  • technology
  • 2022/01/19 15:31
  • 0
• What is the difference between tobacco cigarettes and e-cigarettes?
  The two e-tobacco and cigs are dependent. Nowadays I will give you the real difference between e-cigarettes and cigs.

  1. This is the difference of natural materials

  Electronic cigarettes are electronic digital technological innovation merchandise, that happen to be comprised of atomizers, lithium battery packs, tobacco cigarette bombs, etc. vaping deals，The uncooked fabric of conventional cigs is tobacco, a widely grown plant that can also be used to produce shredded cigarettes.

  2. Different combustion temperature

  The atomization temperature of e-tobacco cigarettes is approximately 200 diplomas. The burning up temp of conventional cigs is often as great as one thousand degrees, and over 4,000 types of decomposition substances is going to be created.

  3. The cigarette smoke made is unique

  The cigarette smoke produced by e-cigarettes is really water vapor. The fog is thicker and also the debris are relatively tiny. The cigarette smoke particles manufactured by standard cigs are relatively large. However, the cigarette smoke produced by these two types of smoke comes with an effect on the body.

  4. Various impact

  Compared with standard cigs, the cigarette smoke produced by e cigarettes has much less affect on men and women all around. But it is also dangerous.

  5. Different likes

  Cigs have distinct flavours, and most cigs have a one smoking cigarettes taste. E-tobacco cigarettes have richer types and may be selected anytime.

  Nonetheless, whether or not using tobacco e-cigarettes or classic tobacco cigarettes, it will trigger psychological dependency and cause harm to the entire body to some specific magnitude. As a result, for your very own health, we suggest every person to quit cigarette smoking at the earliest opportunity.
  
  
  like：
  

  How to learn to spit circles with smoke

  Methods and techniques of spitting circles:

  Methods and techniques of learn to spit circles with smoke
  • technology
  • 2022/01/05 12:01
  • 0
• What will be the features of the sapphire see

  Sapphire: an frustrating selection for deluxe and high-undefinedaccomplish designer wrist watches. Sapphire ideal for notice crystals could be a man-made fabric (as an alternative to all-natural gems).sapphire cover  Because the most difficult components on the planet, it is actually very difficult to have destroyed-undefinedan illustration of its mark level of level of resistance certainly is the many faultless crystals which can be viewed on designer timepieces that have been visibly donned through the years. In addition, it has outstanding high quality, could certainly make dial aspects appearance more clear, typically gives a thoroughly thoroughly clean, better-undefinedstop really feel.

   

  Nonetheless, the sapphire crystal may possibly have fantastic reflectivity without contra --undefinedrefractive finish treatment method, which is not favorable to legibility. Moreover, while all kinds of other resources may split or shatter, sapphire may shatter-regardless that it will likely be vunerable to extreme shocks, this may not be preferred.
  
  

  The key downside of sapphire crystal could it be is normally more expensive. It needs great-undefinedtechnological innovation era, and its particular distinct solidity is likely to make it tough to product, specially stylish styles. Nonetheless, with the growth of contemporary modern technology and an upswing in buying selections, far more admittance-undefineddegree businesses have begun to give it, and-undefinedend famous brands are actually able to utilize it for more points, for instance the output of total sapphire circumstances.
  
  like：
  
  Is the sapphire window see mark tolerant?

  What are definitely the uses of synthetic sapphire
  
  

  Synthetic approach to man-made jewel individual crystal

  
  

   

  • technology
  • 2021/12/30 11:46
  • 0
• What is injection pressure?
  Injection tension means that the pushing force applied together with the attachment clamps the molten plastic-like material compound into the mold cavity. It is actually very balanced due to the clamping tension in the equipment. The picture tension may be the melt stress that handles all the additional thoughts by injection..mould supplier， Injection tension is usually used to overcome the resistance of the molten material in the barrel on the cavity, so that the textile includes a specific finish price and compacts it. The impact stress can be assessed by using sensors throughout the nozzle or hydraulic drinking water pipe. It does not provide a fixed reward, the more difficult it is to apply pressure to the fungus, the greater the injection pressure.
  
  
  Injection molding is the process of using warm materials to complete the mold cavity. In theory, if the surface defects and fungal infection factors of goods and services are not considered, the faster the speed, the better the effect. But because combustion will produce resistance in the circulation method (tension through the mold), and there is tension resistance from your mold cavity, so the equipment must provide an amount greater than or equal to the resistance (hydraulic from the opportunity method) to help melt The material flows into the cavity, which happens to be that the injection molding process is also an activity that overcomes the resistance level. At the end of injection molding, is there often stress from the beginning? Absolutely not, although the injection is normal. When the textile flow meets the fungal cavity, its contact with the functional working surface continues to occur
  
  
  like:
  How does temperature affect the quality of plastic molded parts?
  What is the suitable temperature for injection molding?
  What kind of goods and services requires two shots molding?
  
  
  • technology
  • 2021/12/09 16:47
  • 0